For Harley-Davidson enthusiasts, especially those riding the powerful 2019 FXDR 114, customization and enhanced functionality are often top priorities. Whether it’s adding auxiliary lighting for increased visibility or integrating performance accessories, the key lies in understanding your bike’s system – and it all starts with the OBD2 port. If you’re wondering about the 19 Fxdr Obd2 Port location and how to leverage it for smart upgrades, you’ve come to the right place.
The 2019 FXDR 114, like many modern Harley-Davidson models, is equipped with an OBD2 (On-Board Diagnostics II) port. This port is not just for diagnostics; it’s your gateway to intelligent accessory integration. Locating the 19 fxdr obd2 port is the first step to unlocking a world of customization, and with the DENALI CANsmart™ Controller, you can harness its power to seamlessly control and manage your motorcycle accessories.
Finding the OBD2 Port on Your 2019 FXDR 114
Typically, the OBD2 port on a Harley-Davidson FXDR 114 is located in an easily accessible area, often under the seat or behind a side panel. For the 2019 FXDR specifically, you’ll generally find the 19 fxdr obd2 port under the left side cover, near the battery compartment. It’s a small, rectangular connector, and it’s the central nervous system for communicating with your bike’s electronics.
Alt text: Locating the OBD2 port on a Harley-Davidson motorcycle, essential for installing the DENALI CANsmart Controller.
Once you’ve located the 19 fxdr obd2 port, you can connect devices like the DENALI CANsmart™ Controller to expand your bike’s capabilities. This eliminates the need for complex wiring and allows for plug-and-play installation of various accessories.
DENALI CANsmart™ Controller: Intelligent Accessory Control via Your 19 FXDR OBD2 Port
The DENALI CANsmart™ Controller is engineered to communicate directly with your Harley-Davidson’s CAN bus system through the diagnostic port – the 19 fxdr obd2 port on your FXDR 114. This clever device provides a clean and intelligent way to control aftermarket and genuine Harley-Davidson accessories directly from your motorcycle’s existing controls.
Alt text: DENALI CANsmart Controller connected to a Harley-Davidson OBD2 port, enabling smart accessory management.
By plugging the CANsmart™ into the 19 fxdr obd2 port, you gain access to over 35 programmable settings. Imagine controlling auxiliary lights, horns, and even brake lights with your factory switches. The CANsmart™ makes this a reality, offering seamless integration and enhanced functionality for your FXDR 114.
Key Features and Benefits for Your FXDR 114
The DENALI CANsmart™ Controller offers a range of features designed to enhance your riding experience on your 2019 FXDR 114:
-
Enhanced Visibility and Safety:
- High/Low Beam Sync: Synchronize your passing lamps and auxiliary lights with your high beam, ensuring optimal visibility in varying conditions.
- Modulating Lights: Increase your visibility to other drivers by setting your auxiliary lights to modulate.
- Smart Brake Technology: Activate auxiliary brake lights upon deceleration, even before applying the brakes, thanks to real-time vehicle speed monitoring.
- Flash Pattern Braking: Choose from various flash patterns for your auxiliary brake lights to maximize attention, including a California legal flash rate.
-
Advanced Lighting Control:
- ON/OFF and Dimming: Independently control two sets of lights and adjust their intensity for day and night riding directly from your factory trip switch.
- Flash to Pass: Quickly grab attention by pulsing your high beam switch, causing auxiliary lights to strobe.
- Turn Signal Integration: Features like “Cancel With Turn Signal” and “Flash With Turn Signal” ensure your auxiliary lights work harmoniously with your turn signals, preventing overpowering signals and enhancing visibility during turns.
-
Horn and Accessory Management:
- Plug & Play Horn Installation: Easily connect high-power aftermarket horns like the DENALI SoundBomb™ without extra relays or harnesses.
- Strobe with Horn: Set your auxiliary lights to strobe automatically when you sound your horn for added visibility in critical situations.
- Switched Power Source: Provides a clean, switched 12V power source for accessories like GPS, heated gear, or phone chargers, turning them on and off with your ignition.
- Delay Time Out: Keep accessories powered for up to 30 seconds after turning off your bike, useful for GPS devices or completing phone charging.
Alt text: Close-up of the DENALI CANsmart Controller module, highlighting its compact design and connectivity for Harley-Davidson OBD2 port integration.
Seamless Integration and Broad Compatibility
The CANsmart™ Controller is designed for seamless integration with Harley-Davidson motorcycles, including the 2019 FXDR 114. Its plug-and-play design means you can quickly connect it to the 19 fxdr obd2 port and start customizing your ride. It’s compatible with a wide range of Harley-Davidson models from 2014 onwards, ensuring that your FXDR can benefit from this advanced accessory control system. Furthermore, it works with both DENALI and genuine Harley-Davidson accessories, offering versatility in your customization choices.
Take Command of Your FXDR 114
For 2019 FXDR 114 owners looking to enhance their bike’s functionality and safety, understanding the 19 fxdr obd2 port is crucial. The DENALI CANsmart™ Controller leverages this port to provide an unparalleled level of intelligent accessory control. Upgrade your ride and experience the confidence that comes with complete command over your Harley-Davidson FXDR 114 with DENALI CANsmart™.
For detailed instructions and software downloads, refer to the CANsmart Software section and instruction manual available on our website. Take the first step towards a smarter, safer, and more customized ride today!
