Locating the OBD2 port in your vehicle is usually a straightforward task, as it’s commonly placed in an easily accessible location under the dashboard on the driver’s side. However, for some older models like the 1998 Honda CR-V, the location might not be as obvious. If you’re trying to connect a scan tool to diagnose your 1998 Honda CR-V, finding the OBD2 port is the first step.
For the 1998 Honda CR-V, the OBD2 port is often found on the passenger side of the vehicle. Instead of being directly under the dashboard near the steering wheel, you should check the area near the center console on the passenger side. It’s often positioned in the vicinity of the glove box or slightly lower, integrated into the lower dashboard panel.
It’s important to note that the connector might be mounted in a bracket, which could be made of metal or plastic. This bracket helps secure the OBD2 port and might be somewhat hidden from immediate view. You might need to look carefully behind any trim panels or carpeting in the passenger footwell area, close to the center console, to spot it.
If you are having trouble locating it, try looking for a 16-pin connector. The OBD2 connector is standardized and will have 16 pins. Referencing online diagrams or owner’s forums specific to the 1998 Honda CR-V can also be helpful in visually identifying the port and its bracket.
1998 Honda CR-V OBD2 port location example – passenger side dashboard area
If you’ve checked the passenger side area near the center console and still can’t find the OBD2 port, double-check the surrounding areas and ensure the connector hasn’t been pushed out of its holder or become detached. In rare cases, for very early OBD2 implementations, there might be slight variations, but for a 1998 Honda CR-V, it should adhere to the OBD2 standard and be located in the general passenger side area described.
Once you locate the OBD2 port, you can confidently connect your scan tool and proceed with diagnosing any potential issues with your 1998 Honda CR-V.
