Master Pro Car Parts: Assembling Your Moog Front End Kit with Ease

Replacing the front end components of your car might seem like a daunting task, conjuring images of complex machinery and endless parts. However, with Master Pro Car Parts from Moog, overhauling your front suspension can be surprisingly straightforward. It’s far from needing a million different pieces! In fact, upgrading with quality components is more accessible than you might think.

For a typical front end rebuild, the list of essential master pro car parts is quite manageable. You’ll generally need items such as:

  • Inner Tie Rod Ends (2)
  • Outer Tie Rod Ends (2)
  • Adjuster Sleeves (2)
  • Lower Ball Joints (2)
  • Upper Ball Joints (2)
  • Upper Bushings (4)
  • Lower Front Bushings (2)
  • Lower Rear Bushings (2)
  • Lower Bump Stops (2)
  • Upper Bump Stops (2)
  • Idler Arm (1)
  • Center Link (1)

This comprehensive list totals just 12 part numbers, accounting for 24 individual pieces. Any competent auto parts professional should be able to quickly assemble this list and provide you with a total cost. Alternatively, a quick online search for Moog part numbers specific to your vehicle model will allow you to walk into your local parts store fully prepared.

In my own experience, sourcing master pro car parts from Moog has been exceptionally smooth. When rebuilding the front end of my Nova, I compiled a list of Moog part numbers online and took it to my local Carquest. For around $300, I acquired every new component for the front end, excluding only the steering arm and center link. The parts arrived the very next day, without any shipping fees, and each component fit perfectly, exactly as intended.

This experience stands in stark contrast to a less successful attempt with a PST kit for my cousin’s ’69 Camaro. While the PST bushings fit adequately, critical master pro car parts like the ball joints and tie rods were problematic. The studs were too long, necessitating washers under each nut just to properly secure the cotter pins. Three years later, his Camaro remains off the road, pending a replacement of these suspect parts with, you guessed it, Moog ball joints and tie rod ends.

Moog’s reputation for quality master pro car parts is further solidified by the fact that performance specialists like Detroit Speed Engineering (DSE) incorporate Moog components into their control arms and also sell Moog parts independently in their catalog. This endorsement from a high-performance aftermarket manufacturer speaks volumes about the reliability and precision of Moog parts.

For a straightforward and dependable front end rebuild, choosing master pro car parts from Moog ensures a hassle-free installation and lasting performance, letting you get back on the road with confidence.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *