This guide will walk you through the process of connecting your Driver Obd2 Wifi scanner to a Windows operating system. Using an ELM327 WIFI scanner offers a convenient wireless solution for diagnosing your vehicle’s health. Whether you are a seasoned mechanic or a car owner keen on understanding your vehicle better, this step-by-step tutorial will ensure a smooth connection between your OBD2 scanner and your Windows device.
Setting Up Your Driver OBD2 WIFI Scanner on Windows (Vista, 7, 8, 10+)
These instructions are applicable for Windows Vista, 7, 8, 10, and newer versions. The process is straightforward and should have you connected in minutes.
-
Locate the OBD2 Port and Plug in the Scanner: First, you need to physically connect your ELM327 WIFI scanner to your vehicle. The OBD2 port is typically located inside the cabin on the driver’s side, usually beneath the steering wheel. It’s often found on the lower edge of the dashboard. Plug your WIFI OBD2 scanner firmly into this port.
-
Turn ON the Ignition: Next, turn your vehicle’s ignition to the “ON” position. This means turning the key to the point where the dashboard lights illuminate, but without starting the engine. This step powers up the OBD2 port and your scanner.
-
Connect to the WIFI Signal: Now, on your Windows computer, open the WIFI manager. Your WIFI OBD2 scanner will broadcast a WIFI signal, much like a home router. Look for a WIFI network name that resembles any of the following examples: WIFI ELM327, WiFiOBD, OBDDevice, or V-Link. It might take up to 30 seconds for the WIFI signal to appear in your list of available networks, so be patient. Once you see it, select the network name and click “Connect”.
The default password to connect to the WIFI network is usually 12345678. Enter this password when prompted.
-
Launch Your OBD Software: With the WIFI connection established, you now need to use OBD software to communicate with your vehicle through the scanner. If you don’t already have software, we recommend TOAD software, which is fully compatible with WIFI OBD2 scanners. However, many other OBD software options are available and should work as well. Launch your preferred OBD software on your Windows PC.
-
Configure Software Settings for WIFI: Most OBD software is initially configured to connect via USB or Bluetooth. You need to adjust the settings to use a WIFI connection. Navigate to the “Settings” or “Connection” section within your software and select “WIFI” as the connection type.
-
Set the WIFI IP Address and Port: Finally, you need to configure the WIFI IP address and port within your OBD software settings. Enter the IP Address as 192.168.0.11 or alternatively 192.168.0.10. For the Port, enter 35000. These are the most common settings, but it’s always a good idea to double-check the documentation or website of the seller or manufacturer of your specific WIFI ELM327 scanner for the recommended IP address and port.
-
Establish Connection: With all settings configured, your OBD software should now be able to successfully connect to your vehicle through the WIFI OBD2 scanner. You should see an indication within the software confirming a successful connection. You can now start performing vehicle diagnostics.
Windows XP Setup for Driver OBD2 WIFI Scanners
If you are using Windows XP, the process is slightly different, mainly in how you configure the IP address. Follow these steps to set up your driver obd2 wifi scanner:
-
Plug in and Turn Ignition ON: Repeat steps 1 and 2 from the Windows Vista, 7, 8, 10+ instructions. Plug the ELM327 WIFI scanner into the OBD2 port and turn your vehicle’s ignition to the “ON” position.
-
Connect to WIFI Network: Follow step 3 from the previous section to connect your Windows XP computer to the WIFI signal broadcast by the OBD2 scanner. Look for network names like WIFI ELM327, WiFiOBD, OBDDevice, or V-Link and use the password 12345678 to connect.
-
Access WIFI Status and Properties: Once connected to the WIFI network, right-click on the WIFI signal icon in your system tray (usually in the bottom right corner of your screen). Select “Status” from the context menu.
Accessing WIFI Status in Windows XP to configure IP settings for your OBD2 WIFI scanner.
-
Open WIFI Connection Properties: In the “Wireless Network Connection Status” window that appears, click on the “Properties” button.
Opening WIFI Connection Properties to modify TCP/IP settings for OBD2 WIFI adapter.
-
Configure TCP/IP Settings: In the “Wireless Network Connection Properties” window, scroll down and find “Internet Protocol (TCP/IP)” in the list. Select it and then click the “Properties” button.
In the “Internet Protocol (TCP/IP) Properties” window, you need to set a static IP address. Select the radio button “Use the following IP address:”.
Enter the following IP address: 192.168.0.11
Enter the following Subnet mask: 255.255.255.0
Setting a static IP address and subnet mask in Windows XP for proper OBD2 WIFI scanner communication.
Leave the “Default gateway” and “Preferred DNS server” fields blank. Click “OK” in all open windows to save the new TCP/IP settings.
-
Launch and Configure OBD Software: Repeat steps 4-9 from the Windows Vista, 7, 8, 10+ instructions. Launch your OBD software, configure it to use a WIFI connection, and set the WIFI IP Address to 192.168.0.11 (or 192.168.0.10) and the Port to 35000.
-
Establish Connection and Diagnose: Your software should now connect to your OBD2 WIFI scanner. You are ready to begin diagnosing your vehicle using your Windows XP machine.
Conclusion
Connecting your driver obd2 wifi scanner to Windows is a simple process that unlocks a wealth of diagnostic information about your vehicle. By following these steps, whether you are using a modern Windows OS or even Windows XP, you can quickly establish a wireless connection and start using OBD software to read trouble codes, monitor engine parameters, and gain valuable insights into your car’s performance. Remember to consult your scanner’s documentation if you encounter any issues or require specific IP address or port settings.
Resources:
- TOAD Software (Recommended OBD Software)
