For drivers seeking continuous security and surveillance, even when their vehicle is parked, the Garmin Obd2 Interface offers a seamless solution to power your dashcam around the clock. This innovative accessory, exemplified by the Garmin OBD-II Constant Power Cable, eliminates the limitations of battery-powered recording and ensures your Garmin dashcam is always ready to capture crucial events.
Unlocking 24/7 Dashcam Surveillance with the OBD2 Interface
The Garmin OBD2 Constant Power Cable is designed for effortless “plug and play” installation into your vehicle’s OBD-II diagnostic port. This port, commonly found in modern vehicles, provides a direct power source, enabling your Garmin dashcam to operate even after the engine is turned off. This constant power supply is crucial for features like parking mode, which records incidents that occur while your car is unattended, offering enhanced protection against vandalism or hit-and-run accidents.
Maximize Coverage with Dual Dashcam Support
A standout feature of the Garmin OBD2 interface cable is its dual USB output. This allows you to power not just one, but two Garmin dashcams simultaneously. Imagine equipping your vehicle with both a front-facing camera like the Garmin Dash Cam 57 and a rear-facing camera such as the Garmin Dash Cam Mini 2. This dual setup provides comprehensive video coverage of both the front and rear of your vehicle, significantly increasing your peace of mind and providing more evidence in case of an incident.
Customizable Power Modes for Your Needs
Garmin understands that different drivers have different needs. That’s why the OBD2 Power Cable incorporates an adjustable time switch, offering three distinct power modes to tailor dashcam operation to your specific requirements:
- 10 Minute Mode: Ideal for short stops, this mode keeps your dashcam powered for 10 minutes after you turn off the engine. It then automatically powers down, conserving battery. The dashcam will reactivate when you restart your vehicle.
- 24 Hour Mode: For extended parking surveillance, the 24-hour mode ensures your Garmin dashcam remains active for a full 24 hours after engine shutdown. Crucially, it includes built-in low battery detection to prevent vehicle battery drain. If the voltage drops below 12V, the cable intelligently shuts off the dashcam.
- Always On Mode: For continuous recording, this mode keeps your dashcam powered at all times. However, it still incorporates the low battery protection feature, automatically cutting power if the voltage falls to or below 12V to safeguard your vehicle’s battery. Power is restored to the dashcam once the engine is restarted and voltage levels normalize.
The intelligent timer within the Garmin OBD2 interface cable automatically resets upon detecting motion, impact, door opening, or engine operation. This ensures that the dashcam remains vigilant and responsive to relevant events.
Intelligent Low Battery Protection
A key concern with constant power accessories is vehicle battery drain. Garmin addresses this directly with integrated low battery protection in their OBD2 Constant Power Cable. If the cable detects a voltage drop below 12.0V, it will automatically shut down within 10 minutes, preventing a dead battery and ensuring you can always start your vehicle.
Clear Status Indication with Red LED
The Garmin OBD2 interface includes a helpful Red Status LED indicator, providing clear visual feedback on the cable’s operational status:
- Solid Red: Indicates that the cable is actively supplying power to connected dashcams.
- Flashing Red: Signals that the selected timer mode has expired, and power is no longer being supplied.
- Off: Indicates that the cable is receiving less than 12V of power, and the low battery protection has deactivated the device to conserve vehicle battery charge.
Broad Garmin Dashcam Compatibility
The Garmin OBD2 Constant Power Cable is compatible with a wide range of Garmin dashcam series, including:
- 6 Series
- 7 Series
- Mini Series
- Tandem Series
- Live LTE Series
- X Series
Please note that while compatible with most passenger vehicles, this OBD2 interface is not compatible with commercial vehicles utilizing a J1939 connector.
Authorized Source for Garmin Accessories
When purchasing your Garmin OBD2 interface and dashcams, ensure you are buying from an authorized distributor like The Dashcam Store™. This guarantees you receive genuine Garmin products, full warranty support, and avoid the risks associated with unauthorized or grey-market sellers.
Upgrade your dashcam system with the Garmin OBD2 interface and enjoy continuous, reliable power and enhanced parking surveillance, knowing your vehicle and recordings are protected around the clock.
