Keep your vehicle protected around the clock with the innovative Garmin OBD2 Constant Power Cable. This simple plug-and-play solution ensures your Garmin dash cam remains powered even after you’ve turned off the engine, providing continuous surveillance and peace of mind.
Continuous Power for Uninterrupted Monitoring
The Garmin Obd2 Power Cable is designed to seamlessly integrate with your vehicle’s OBD-II diagnostic port, delivering a constant power supply to your compatible Garmin dash cam. This eliminates the need to rely solely on your car’s ignition, enabling parking mode and extended recording capabilities. Whether you’re concerned about overnight incidents, parking lot mishaps, or simply want to ensure comprehensive coverage, this power cable has you covered.
Power Two Dash Cams with Dual USB Ports
Maximize your vehicle’s surveillance by connecting not one, but two Garmin dash cams to a single power source. The Garmin OBD2 Constant Power Cable features dual USB ports, allowing you to simultaneously power front and rear-facing cameras. Imagine capturing every angle with a Garmin Dash Cam 67W on your windshield and a Garmin Dash Cam Mini 2 at the rear. This dual-camera setup provides comprehensive coverage and enhanced security for your vehicle.
Customizable Power Modes for Every Situation
Tailor your dash cam’s power usage to your specific needs with the OBD2 Power Cable’s adjustable time switch. Choose from three distinct modes:
10 Minute Mode
For short stops and minimal battery drain, select the 10 Minute Mode. Your dash cam will continue recording for 10 minutes after your engine is switched off, providing coverage for brief parking situations. It will then automatically power down and reactivate once you restart your vehicle.
24 Hour Mode
Ensure extended parking surveillance with the 24 Hour Mode. Your Garmin dash cam will remain active for a full 24 hours after you park. Intelligently designed with low voltage detection, this mode automatically shuts off the camera if your car battery dips below 12V, preventing battery drain and ensuring you can always start your car.
Always On Mode
For ultimate continuous recording, the Always On Mode keeps your dash cam powered indefinitely. This mode is ideal for maximum protection, ensuring your camera is always ready to capture events. Like the 24 Hour Mode, it includes low battery protection to safeguard your vehicle’s battery. The built-in timer in all modes resets upon motion detection, impact, door opening, or engine start, ensuring relevant events are always captured.
Intelligent Battery Protection
Rest assured that the Garmin OBD2 Constant Power Cable prioritizes your vehicle’s battery health. Equipped with low battery voltage detection, the cable automatically shuts down power to your dash cam if it senses the battery voltage dropping below 12.0V. This crucial feature prevents accidental battery drain and ensures you’re never stranded with a dead battery.
Easy Status Monitoring with LED Indicator
The integrated red status LED provides instant visual feedback on the OBD cable’s operation:
- Solid Red: Indicates the cable is actively powering connected devices.
- Flashing Red: Signals that the set timer has expired, and power is no longer being supplied.
- Off: Indicates the cable is receiving less than 12V, and low battery protection is active to conserve vehicle battery.
Wide Compatibility with Garmin Dash Cam Series
The Garmin OBD2 Constant Power Cable is compatible with a wide range of Garmin dash cams, including:
- 6 Series
- 7 Series
- Mini Series
- Tandem Series
- Live LTE Series
- X Series
Note: Compatible with most passenger vehicles. Not compatible with commercial vehicles using a J1939 connector.
Purchase your Garmin OBD2 Constant Power Cable from authorized distributors like The Dashcam Store™ for guaranteed quality and support.
