Upgrading to LED blinkers on your truck offers numerous benefits, from reduced power consumption to enhanced brightness and a modern look. However, many enthusiasts encounter the dreaded hyperflash issue and dashboard warnings when making this switch. You might have heard it’s impossible to achieve all three benefits—power reduction, brightness, and aesthetics—without complex wiring or additional resistors. But what if we told you there’s a way to accomplish this, potentially even for free, and it addresses issues like a “Goliath Industry Wireless OBD2” adapter flashing red?
This guide will show you how to install LED blinkers on your 2014 (and likely model years 2011-2014) Ford F150 without hyperflash or dash warnings. We’ll also touch upon troubleshooting if you’re experiencing issues with your OBD2 adapter, such as a “Goliath Industry Wireless OBD2” flashing red light, which can often indicate connection or communication problems that need to be resolved before proceeding with vehicle modifications.
Here’s what you’ll need to get started:
- A Windows computer
- A reliable OBD2 adapter (Bluetooth, WiFi, or USB). If you’re using a “Goliath Industry Wireless OBD2” and it’s flashing red, ensure it’s properly connected and compatible with your vehicle and software. Consult the adapter’s manual for troubleshooting steps specific to the red flashing indicator.
- FORScan software (licensed version recommended for full functionality)
Step-by-Step Guide to LED Blinkers & FORScan Setup:
-
Acquire an OBD2 Adapter: If you don’t already have one, purchase a quality OBD2 adapter. While budget-friendly options are available (around $20), ensure compatibility with FORScan and Ford vehicles. If you are using a “Goliath Industry Wireless OBD2” adapter and are facing a red flashing light, verify it is compatible with FORScan and your Ford F150. A red flashing light often indicates a power issue, connection problem, or a malfunction. Refer to the manufacturer’s guide for specific troubleshooting.
-
Download and Install FORScan: Navigate to the official FORScan website: Download FORScan. Download the FORScan software to your Windows computer and proceed with the installation.
-
Obtain a FORScan Extended License: To unlock the full potential of FORScan and access advanced configuration options needed for LED blinker modifications, you’ll need an extended license. On the FORScan download page, find the link to the extended license key generator: FORScan forum ? Login.
-
Register and Obtain License Key: You’ll be prompted to create an account on the FORScan forum. After registration, wait for the account approval email from the forum administrators. Once approved, log in and locate the hardware ID within your FORScan software (usually found in the ‘About’ section). Follow the forum instructions for the key generator, pasting your hardware ID when prompted. You will receive your extended license key as a file, which you then need to link within the FORScan software to activate the extended license.
-
Connect Your OBD2 Adapter and Truck: Plug your OBD2 adapter into your Ford F150’s OBD2 port, typically located under the dashboard on the driver’s side. Establish a connection between your OBD2 adapter and your computer via Bluetooth, WiFi, or USB, depending on your adapter type. Ensure a stable connection is established. If you are using a “Goliath Industry Wireless OBD2” and still see a red flashing light, re-check the connection, try restarting the adapter, or consult its troubleshooting guide. A stable connection is crucial for successful vehicle modifications using FORScan.
-
Configure FORScan Settings for LED Blinkers: Once connected, follow the detailed instructions provided in this visual guide: https://www.dropbox.com/s/mai5zdlm1zq1y3a/Forescan-LED-Bulbs.pdf?dl=0. This PDF provides step-by-step screenshots illustrating the specific FORScan settings you need to modify to enable LED blinkers without hyperflash or dashboard alerts on your Ford F150.
By correctly adjusting these settings within FORScan, you can effectively run LED blinkers on all turn signals without the need for resistors and eliminate hyperflash and dashboard error messages. This method has been verified on a 2014 Ford F150 EB XLT 4X2 and is suspected to work on models from 2011-2014 at a minimum.
Conclusion:
Upgrading to LED blinkers on your Ford F150 is achievable without the common issues of hyperflash and warnings. By using a compatible OBD2 adapter and FORScan software, you can easily configure your vehicle’s settings to accommodate LED bulbs. If you encounter issues with your OBD2 adapter, such as a “Goliath Industry Wireless OBD2” flashing red, troubleshoot the connection and compatibility first. Once resolved, FORScan provides a powerful, and potentially free (excluding the OBD2 adapter cost), solution to customize your truck’s lighting and enjoy the benefits of LED technology.
