Discover the untapped potential of your vehicle with NitroOBD2, the plug-and-play performance chip tuning box designed to boost your car’s power and torque. Specifically engineered for gasoline engines and easily identifiable by its YELLOW casing, NitroOBD2 offers a simple yet effective upgrade, delivering up to 35% more power and up to 25% more torque.
Why Choose the Nitro OBD2 Performance Chip?
NitroOBD2 stands out as the smart choice for enhancing your car’s performance due to its user-friendly design and impressive features:
- Effortless Installation (Plug and Play): No complex tools or mechanical expertise required. Simply plug NitroOBD2 into your car’s OBD2 port.
- Affordable Performance Upgrade: Experience significant gains in performance without breaking the bank. NitroOBD2 is a cost-effective alternative to traditional tuning methods.
- Broad Compatibility: Designed to be compatible with most cars equipped with an OBD2 port, making it a versatile option for a wide range of vehicles.
- Engine Safety Guaranteed: Built with engine protection in mind, NitroOBD2 safely optimizes your engine’s performance without exceeding factory safety limits.
- Peace of Mind Warranty: Comes with a 2-year warranty, ensuring product quality and customer satisfaction.
Checking for OBD2 Port Compatibility
Before you proceed, ensure your car has an OBD2 port, which is standard in most modern vehicles. Typically located beneath the steering wheel, you can also check above the pedals. The OBD2 socket is usually black or white.
Locate your OBD2 port easily: http://bit.ly/2FJ5DgZ
Nitro Obd2 Reset, Installation, and Calibration: A Quick Guide
Duration: 1-2 minutes
Difficulty: Very Easy
The nitro obd2 reset process is integral to the initial setup, ensuring optimal communication between the chip and your car’s Engine Control Unit (ECU). Follow these simple steps for installation and calibration:
- Turn off the ignition: Remove the key from the ignition to ensure the car is completely off.
- Connect NitroOBD2: Plug the NitroOBD2 device into your car’s OBD2 port, ensuring a firm connection.
- Enter ACC Mode: Insert the key back into the ignition and turn it to the ACC mode (one click to the right). This powers on the car’s electronics without starting the engine.
- Perform the Nitro OBD2 Reset: Locate the small reset button on the NitroOBD2 unit (a small hole above the Nitro logo). Press and hold this button for approximately 5 seconds, then release. This nitro obd2 reset step is crucial as it allows the NitroOBD2 chip to communicate and establish a connection with your car’s ECU. Wait for 30-40 seconds for this communication to finalize.
- Start Engine and Drive: Start your car’s engine as usual. You are now ready to experience the enhanced performance. The NitroOBD2 chip will begin optimizing your car’s performance as you drive.
Frequently Asked Questions (FAQ)
Q: Will NitroOBD2 work with my car?
A: Compatibility is based on the OBD2 port. If your car is equipped with an OBD2 port, NitroOBD2 should be compatible.
Q: Will installing NitroOBD2 void my vehicle warranty?
A: No, NitroOBD2 is designed as a plug-and-play device. It’s easily removable, and upon unplugging, your car reverts to its factory settings, leaving no trace of the modification.
Q: Is NitroOBD2 safe for my car’s engine?
A: Yes, NitroOBD2 is completely safe. It’s engineered to tune the engine to its maximum safe capacity without exceeding factory limitations, ensuring engine safety and longevity.
Q: What is the warranty period for NitroOBD2?
A: NitroOBD2 comes with a 2-year warranty, covering any manufacturing defects and ensuring customer satisfaction.
Protect Yourself from Counterfeit Nitro OBD2 Chips
Be cautious of fake NitroOBD2 chips available online. Counterfeit products may not deliver the promised performance enhancements and could potentially harm your vehicle. Always purchase from reputable sources to ensure you receive a genuine NitroOBD2 performance chip.
Fake Nitro OBD2 Chips
