The P3 V3 Gauge is not just another car accessory; it’s a comprehensive digital monitoring system seamlessly integrating with your vehicle’s OBD2 port. While the term “Obd2 Charger” might bring to mind battery charging, in the realm of automotive diagnostics and performance monitoring, the OBD2 port is a gateway to a wealth of information. The P3 V3 Gauge expertly leverages this port, drawing power and data to provide you with real-time insights into your car’s vital signs.
Key Features of the P3 V3 Gauge
This innovative gauge is designed for ease of use and a clean, factory-like integration into your vehicle’s interior. Here’s a breakdown of its standout features:
-
Effortless Plug and Play Installation: Forget complicated wiring. The P3 V3 Gauge is designed for a straightforward plug-and-play setup directly into your OBD2 port. This eliminates the need for extensive modifications and gets you up and running in minutes. For those who need to keep their OBD2 port accessible, a hard-wire harness kit is also available, offering flexibility in installation.
-
OEM-Grade Integration: The gauge is designed to install directly into your existing air vent, ensuring a sleek, integrated look that complements your car’s interior. This placement is not only aesthetically pleasing but also practical, maintaining airflow while providing a clear line of sight to the display.
-
Versatile Boost Monitoring: Stay on top of your engine’s performance with versatile boost reading capabilities. The P3 V3 Gauge can read boost pressure from your vehicle’s OEM sensors via the OBD2 port. For enhanced accuracy or specific setups, it also supports an optional P3 analog boost sensor.
-
On-Demand Diagnostic Trouble Code (DTC) Reading and Clearing: Take control of your car’s diagnostics. The P3 V3 Gauge empowers you to read and clear diagnostic trouble codes (DTCs) directly from the device. This feature can save you time and money by allowing you to address minor issues promptly.
Comprehensive Suite of Real-Time Readouts
The P3 V3 Gauge goes beyond basic monitoring, offering a wide array of real-time data points to keep you informed about your vehicle’s health and performance. All readouts are configurable to display in either Imperial or Metric units, catering to your preference.
-
Boost Pressure: Monitor your engine’s boost levels, crucial for turbocharged and supercharged vehicles.
-
Coolant Temperature: Keep an eye on your engine’s coolant temperature to prevent overheating.
-
Vehicle Speed: Accurately track your speed, with calibration options in 1% increments from -9% to +20% to ensure precision, even with aftermarket modifications.
-
Intake Air Temperature: Monitor the temperature of the air entering your engine, an important factor in performance tuning.
-
Throttle Angle: Observe your throttle input, useful for diagnosing throttle response and performance issues.
-
Ignition Timing: View your engine’s ignition timing, a key parameter for engine efficiency and power.
-
Engine RPM: Track your engine’s revolutions per minute.
-
Exhaust Gas Temperature (EGT): Monitor exhaust gas temperature, especially critical for performance and turbocharged applications to prevent damage.
-
Battery Voltage: Keep tabs on your car’s battery voltage to ensure proper electrical system function.
-
Programmable Shift Light: Optimize your gear changes with a programmable shift light, enhancing performance and preventing over-revving.
-
Analog Inputs (x2): Expand the gauge’s capabilities with two analog inputs. These inputs (brown and blue wires) allow the gauge to read signals from any 0-5 volt linear output sensor. This opens up possibilities for monitoring parameters beyond the standard OBD2 data, such as wideband air-fuel ratio, oil pressure, or fuel pressure when paired with compatible sensors.
-
Performance Timers: Built-in acceleration and braking timers provide valuable performance metrics:
- Acceleration Timers: 0-60mph, 0-100mph, 60-130mph.
- Braking Timers: 60-0mph, 100-0mph.
Optional OEM Chrome Trim Ring for Enhanced Aesthetics
For a seamless blend with your vehicle’s interior, an optional OEM chrome trim ring can be installed on your vent, eliminating the need to transfer your existing trim.
User-Centric Design and Advanced Control
The P3 V3 Gauge is engineered with user feedback in mind, building upon the already impressive capabilities of the OBD2 Multi-Gauge. It provides an even greater degree of user control, allowing you to:
- Read DTCs on Command: Access diagnostic trouble codes whenever you need them.
- Customize PIDs: Remove parameters (PIDs) from the display that are not relevant to your monitoring needs, streamlining the information presented.
- Individual Unit Configuration: Set your preferred units (Imperial or Metric) for each measurement individually, offering a personalized display.
- Vehicle Speed Calibration: Fine-tune the vehicle speed readout for accuracy, especially important after tire size or gear ratio changes.
- Lambda AFR Reading: Display Air-Fuel Ratio (AFR) in Lambda, a common unit in tuning and performance analysis.
Discreet Yet Powerful: Information When You Need It
The P3 V3 Gauge offers a clean and unobtrusive installation, a significant advantage over bulky pillar or column-mounted gauge pods. Its vent integration maintains an OEM-plus aesthetic, blending seamlessly with your car’s design. Despite its discreet size, the gauge features a bold, bright display that is easily readable at a glance, providing critical information without distraction.
Built to Endure: Robust Performance in Any Climate
The P3 V3 Gauge is engineered to withstand the demanding conditions of the automotive environment. Its vent installation does not compromise your car’s heating or air conditioning functionality. Furthermore, the electronics are rigorously tested to ensure reliable operation in extreme temperatures, from freezing cold (-94°F) to extreme heat, far exceeding typical in-car conditions.
Explore Further and Get Support
For detailed configuration and installation information, visit the V3 install page.
If you require further assistance, our team is readily available. Click on the live chat feature or call us directly at (614) 317-3035.
