The modern vehicle’s Obd2 Dlc (Diagnostic Link Connector) is the gateway to a wealth of information crucial for effective automotive diagnostics and repair. However, accessing and interpreting this data can often be complex and risky. Enter the AES LineSpi SMART BOB, a revolutionary tool designed to simplify your diagnostic process, providing safe and efficient access to your vehicle’s OBD2 DLC. This innovative breakout box enhances your ability to monitor and analyze vehicle communication, ensuring accurate diagnoses and saving valuable time.
The AES LineSpi SMART BOB is engineered to be a significant upgrade from standard DLC interfaces. Measuring 7.5″ x 4″ x 1.5″, it’s designed for comprehensive access while maintaining a user-friendly form factor. This “smart” DLC 16-pin breakout box incorporates pass-through technology, allowing you to simultaneously view live scan tool data and monitor any DLC line using your preferred tools like lab scopes, multimeters, or logic probes. The front panel intelligently mirrors the vehicle’s DLC layout, featuring two rows of 8 pins, further enhanced with LEDs that clearly indicate active OBD-II protocols. This intuitive design simplifies locating and referencing specific data lines and identifying the communication protocol in use. Furthermore, the SMART BOB provides quick and secure access to both chassis ground and power directly through the DLC connector, streamlining your testing setup.
Instant Circuit Status with LED Indicators
The AES LineSpi SMART BOB is equipped with intelligent LED indicators for immediate circuit verification.
-
Ground and Power LEDs (Pins 4, 5, and 16): Upon connecting to an OBD2 vehicle, the LEDs for pins 4 (Chassis Ground), 5 (Signal Ground), and 16 (Battery Power) illuminate, instantly confirming good ground and power connections. Green LEDs indicate pins 4 and 5 are properly grounded, while a red LED confirms power at pin 16. If these LEDs remain dark, you’re immediately alerted to a potential power or ground issue within the vehicle’s DLC system, preventing wasted diagnostic time.
-
Communication Line LEDs (Pins 2, 6, 7, and 10): Yellow LEDs monitor activity on key communication lines. Pin #6 and its corresponding LED are dedicated to CAN (Controller Area Network) activity, mirroring pin #14. Similarly, the LED for Pin #7 indicates activity for ISO (International Organization for Standardization) and KWP (Keyword Protocol 2000) protocols, mirroring pin #15. These LEDs blink dynamically, reflecting data transmission and providing a visual representation of communication activity on these critical OBD2 DLC pins.
Enhanced Diagnostic Capabilities
Beyond basic connectivity, the AES LineSpi SMART BOB offers advanced features to enhance your diagnostic workflow:
-
Pin 16 Isolation Switch: A dedicated switch allows you to isolate pin 16 (vehicle power) from the vehicle’s circuit. This crucial feature enables you to power up your scan tool using an external power source. This is particularly useful when diagnosing power-related issues within the vehicle or when performing module programming that requires a stable and independent power supply, bypassing potential vehicle circuit problems. Pin 16 is also protected with a 1.2 amp polyfuse for added safety.
-
Integrated Voltmeter: The SMART BOB features a built-in voltmeter that displays the voltage present at the OBD2 DLC between pins 4 and 16. This real-time voltage monitoring is invaluable for confirming proper vehicle voltage levels during testing and critical procedures like ECU programming, ensuring stable operating conditions for your diagnostic equipment and the vehicle’s electronic systems.
Broad Compatibility and Versatile Connections
The AES LineSpi SMART BOB is designed for seamless integration into your existing diagnostic setup:
-
Vehicle Compatibility: Universally compatible with all OBD-II compliant vehicles, ensuring broad application across various makes and models.
-
Scan Tool Compatibility: Works flawlessly with your current OBD-II compatible scan tools, maintaining your existing diagnostic software and hardware investments.
-
Measurement Tool Versatility: The SMART BOB intelligently converts the vehicle’s 16-pin DLC spades to safety banana sockets. This innovative design allows you to connect a wide array of measurement tools that utilize standard 4mm banana plugs, including safety sheathed plugs. This opens up connectivity for lab scopes, multimeters, logic probes, test lights, and more, to any of the 16 data lines.
-
Comprehensive Measurement Types: Expand your diagnostic capabilities beyond standard scan data. The SMART BOB enables you to use your lab scope or multimeter to perform in-depth analysis, such as ohm testing for circuit continuity and voltage checks at any pin within the OBD2 DLC, providing a complete picture of the electrical system.
Package Contents:
The AES LineSpi SMART BOB package includes:
- AES LineSpi SMART BOB unit
- 4-foot Extension Cable: Provides increased reach and flexibility during diagnostics.
- Quick Start Guide: For immediate setup and operation.
- Comprehensive online manual available for detailed instructions and advanced features.
Upgrade your diagnostic capabilities with the AES LineSpi SMART BOB and gain unprecedented access and insight into your vehicle’s OBD2 DLC system. Diagnose with confidence and efficiency, saving time and ensuring accurate repairs.
