Installing a vehicle tracking device doesn’t have to be complicated. With a Plug And Play Obd2 tracker, you can easily set up your vehicle tracking in minutes without any professional help. This guide is designed for users of plug and play OBD2 devices, especially those utilizing RAM Tracking services, providing a straightforward, step-by-step approach to get you started.
Important Note: These instructions are specifically for plug and play OBD2 tracking devices. If you have a wired device, professional installation is required. Please contact support for assistance.
Before you begin the installation of your plug and play OBD2 device, it’s crucial to understand a few key points to ensure a smooth and successful setup. Taking these preliminary steps will not only simplify the process but also help in avoiding potential issues down the line.
- Vehicle Compatibility Check: Before proceeding, always verify your vehicle’s compatibility with the OBD2 tracker. This is especially important if you are moving the device between vehicles. OBD2 is a standard, but compatibility can vary. Refer to your device’s compatibility documentation or check online resources to ensure your vehicle is supported.
- Optimal GPS Location: GPS signal strength is vital for accurate tracking. Position your vehicle in an open area with a clear, unobstructed view of the sky. Garages, underground parking, and areas surrounded by tall buildings can hinder GPS reception.
- Engine Off: For safety and to ensure proper device installation, switch off your vehicle’s engine completely before you begin. This prevents any electrical interference during the installation process.
- Download the Tracking App: Most plug and play OBD2 trackers require a companion app for monitoring and accessing tracking data. Download and install the RAM Tracking app (or the app specified for your device) on your smartphone or tablet beforehand. This will allow you to immediately verify the device is working once installed.
Once you’ve completed these preliminary steps, you’re ready to install your plug and play OBD2 tracker. The installation process is designed to be user-friendly and typically involves just a few simple actions.
-
Locate the OBD-II Port: The first step is to find your vehicle’s OBD-II (On-Board Diagnostics II) port. This port is the interface where your plug and play OBD2 tracker connects. In most vehicles, the OBD-II port is strategically placed for easy access, commonly found beneath the dashboard on the driver’s side. Look under the steering wheel column first, as this is the most frequent location. If you don’t find it there, expand your search to other areas under the dashboard.
If you are still unable to locate the port, consult your vehicle’s owner’s manual. The manual will contain a diagram indicating the exact location of the OBD-II port for your specific vehicle model.
-
Connect the OBD2 Tracker: With the OBD-II port located, take your plug and play OBD2 tracking unit and carefully plug it directly into the port. Ensure it is firmly and securely connected. You should feel a click or firm seating to confirm it’s properly inserted.
-
Start and Idle the Engine: After connecting the device, start your vehicle’s engine. Let the engine idle (run without driving) for about 5 minutes. This step is crucial as it allows the OBD2 tracker to initialize, establish a GPS connection, and transmit its location data.
-
Verify Connection via App: Open the RAM Tracking app on your device. Once a GPS signal is acquired and the device is active, you should see your vehicle’s location displayed on the map within the app. This confirms that your plug and play OBD2 tracker is successfully installed and functioning correctly. If you encounter any issues during this stage or do not see your vehicle on the map, please contact support for immediate assistance.
Plug and play OBD2 trackers offer a remarkably simple and effective way to implement vehicle tracking. By following these steps, you can quickly install your device and start monitoring your vehicle with ease. Remember to always check vehicle compatibility and ensure a good GPS signal for optimal performance. For any further assistance or troubleshooting, do not hesitate to contact support.
